Transparent 3D Gloss Enamel Writer 2oz
AMERICANA® GLOSS ENAMELS®
Gloss Enamels are multi-surface, gloss, acrylic paints that boast a smooth, thick consistency. They are available in opaque, transparent, and frost finishes. All of the Gloss Enamels are designed to be compatible with one another and come in a wide variety of vibrant colors.
*Can be baked for a dishwasher-safe finish
*Soap and water clean-up
*Made in the USA
How to Use Gloss Enamels
GLOSS ENAMELS / CRYSTAL GLITTER / CRYSTAL / FROST
Shake well. Clean surface with alcohol. Apply 1-2 coats with a brush or sponge. Allow to cure 4 days. For a dishwasher-safe finish on oven-safe surfaces, place finished piece in a cool oven, set temperature to 325°F, bake for 30 minutes, then cool with oven door partially open. Not for direct contact with food. Suitable for indoor or outdoor use. Cleans up with soap and water.
Tips for Gloss Enamels
Use a light touch, and try not to apply too much pressure with the tip of the brush. Pushing down too hard will cause the paint to wipe off the slippery surface of the glass. Instead, use a light touch and allow the paint to flow off the brush, creating a pool of color. This allows you to create thicker, more solid coverage in one step. If you do need a second coat, make sure to let it dry completely first.
Avoid overworking or re-stroking wet paint areas too much, or you will end up removing the paint from the glass. Get in and get out of the area.
Use a hair dryer on a low setting to speed up the drying time if necessary. A fan can also be used. This can be especially helpful when working on cylinders or pieces with multiple sides.
Keep paint away from food surfaces and the areas that will come in contact with your mouth. Although the paint is non-toxic, you still don't want to ingest it.
Always blot your brush on a paper towel to dry it after rinsing in water. You don't want excess water to remain in the brush while painting.
All types of brushes can be used for glass painting, but can provide different results. Synthetic brushes tend to create visible brushstrokes. Soft, natural-hair brushes allow for more paint to be applied in one stroke, creating smoother coverage.
PREP, CLEAN-UP, AND FINISHING
Before painting, wash the glass in hot soapy water using a soft dishcloth. Price labels and stickers usually remove easily when soaked in hot water. Rinse any soap residue away with warm or hot water, then dry the piece with a soft, lint-free cloth or paper towel.
Handle glass carefully to keep it free of fingerprints, and use rubbing alcohol and a paper towel to remove any prints or smudges.
Clean up small imperfections in still-wet paint by using a wet brush, toothpick, or paper towel to gently wipe off the excess wet paint. To remove all wet paint from a surface, soak the item in warm water.
Correct mistakes in dry paint by using a razor blade to carefully scrape or trim off imperfections.
Allow the painted glassware to dry at least 4 days before use.
If you are combining two glass paint products with different baking times and temperatures, always use the lower temperature and time.
To clear a clogged 3D writer tip, remove the cap and insert a toothpick from the inside of the cap to push the clog out. Be careful not to insert the toothpick from the outside in, or you will push the clog back into the bottle.
To create a finer writing tip, attach a 1" piece of cellophane tape diagonally to the writer tip, then place a finger on the part of the tip where the tape touches and rotate the bottle to create a tapered opening.
Hold the bottle's tip slightly above the surface as you work for best results and smoother lines.